H-17364

H-17364

Mueller® Side and Bottom-Out Stopper Fitting Welding Type - 720 PSIG

Catalog number: H-17364

Specifications:

  • Sizes – 10", 12"
  • For use on steel pipe only with bottom opening sized for standard schedule 40 steel pipe
  • O-ring sealed steel (ASTM A216 WCB) Completion Plug with equalizing valve
  • Flange, Completion Cap, fitting top and bottom halves are forged steel (ASTM A105)
  • Pipe pup included for alternative welding options.
  • Class 400 flange complies with dimensional requirements of ANSI B16.5
  • 720 psig** (4964 kPa) maximum working pressure at 100F (38C)
**This is the maximum pressure of the fitting installed in the line at 100F for Class Locations 1, 2, 3 and 4 as defined in D.O.T./CFR TITLE 49 PART 192. It may be necessary to reduce the line pressure during the drilling, stopping or plugging operations to the maximum working pressure of the machine or its attachments. Refer to charts on following pages.

Catalog PDF

 

Demonstration Video

Pipe Dimension:

Size* of Line Stopper Fitting

Outside Diameter of Shell Cutter Required

Outside Diameter of pipe

Pipe Dimensions

Maximum Wall thickness

Minimum Wall thickness

Maximum Inside Diameter

I.D.Size of Bottom Opening

10"

12-1/2"

10.750"

No limit

No limit

No limit

9-11/16"

12"

12-1/2"

12.750"

.375" (std.wt)

.188"

12.374"

11-5/8"

Drilling/LineStopping Machine combinations that can be used to install and stop-off H-17364 Fittings:

Drilling Machine

Line Stopper Units

UnitNo.4SW

H-17364

C1-36

10" and 12"

Replacement parts:

Fitting Size*

Completion Cap

Test plug

Completion Cap Bolts and Nuts(No. Required)

Completion Cap Gasket

Completion plug Assembly

O-ring Seal

pipe pup

10"

47648

64134

501194 (20)

46434

83488

46428

528756

12"

47648

64134

501194 (20)

46434

83488

46428

528760

*Nominal

Equipment required to install and stop-off H-17364 welding Line Stopper Fittings:

Tool Name

Qty. Req'd.

Line Stopper Unit No. 4SW

10"and12"H-17364

Drilling Machine

1

C1-36

Stopping Machine

2

H-17440

Gate Valve

2

83318

Drilling Machine Adapter

1

83323

Cutter Hub

1

682782†

Shell Cutter

 

682780

Pilot Drill

1

682781

Steel Wedge Stopper*

2

89704

Bottom Stopper

2

681997**

Completion Machine

1

H-17445

Plug Alignment Tool

1

83250

Plug Inserting Tool

1

83237

Plug Extracting Tool

1

83238

Completion Plug Wrench

1

36424

Thread Cleaning Tool

1

89321

Inspection Flange

1

H-17619

*Steel Wedge Stopper with urethane cover suitable for use with gas and petroleum.
**Used only on 1999 or later enhanced fittings.
† Thick Wall 12" Shell Cutter option available.