H-17125-99004

H-17125-99004

Mueller® No-Blo® Bottom Out Line Stopper Fitting Welding Type for Steel Pipe- 250 psig

Catalog number: H-17125-99004

Specifications:

  • Size – 2"
  • For use on steel pipe only
  • Meets all applicable parts of D.O.T/CFR TITLE 49 PART 192
  • O-ring sealed completion plug makes primary seal
  • Fitting top and bottom halves are forged steel (ASTM A105)
  • Cast Iron Completion Cap makes secondary seal
  • 250 psig* (1724kPa)
*This is the maximum pressure of the fitting installed in the line at 100F for Class Locations 1, 2, 3 and 4 as defined in D.O.T./CFR TITLE 49 PART 192. It may be necessary to reduce the line pressure during the drilling, stopping or plugging operations to the maximum working pressure of the machine or its attachments. Refer to charts on following pages.

Catalog PDF

 

     

 

 

Pipe Dimensions:

Size of Line Stopper Fitting

Outside Diameter of Shell Cutter Required (Inches)

Outside Diameter of Pipe (Inches)

Inside Diameter of Bottom Opening

2"

2.250

2.375

1.75"

Drilling/Line Stopping Machine combinations that can be used to install & stop-off H-17125-99004 fittings

Drilling machineLine stopping machine or unit
D-5/DH-5Unit No.1
H-17125-99004 fitting size
D-5 or DH-52"2"

Replacement Parts:

 

Replacement Parts

Size of Fitting

2"

Completion Cap

36312

Completion Plug

501707

Completion Plug O-ring

79506

*This is the maximum pressure of the fitting installed in the line at 100F for Class Locations 1, 2, 3 and 4 as defined in D.O.T./CFR TITLE 49 PART 192. It may be necessary to reduce the line pressure during the drilling, stopping or plugging operations to the maximum working pressure of the machine or its attachments. Refer to charts on following pages.

How to select equipment:

  1. Find chart on following pages containing desired combination of fitting and installation machine (shown in bold type at top of each page and chart). Note: for a given fitting there may be more than one machine and chart.
  2. Under inlet size of fitting to be installed, select catalog number for type of control valve to be used. Options may include one or more of the following: H-10914 Bronze Gate Valve, H-17025 Control Chamber, H-10917 Slide Gate Valve, H-10918 Steel Ball Valve.
  3. Under selected control valve, column lists equipment necessary for each operation on chosen size of fitting. Note: MAOP (Maximum Allowed Operating Pressure) provided for each operation must not be exceeded. MAOP may be different for each operation.

D-5/DH-5 and Unit #1 Machine

H-17125-99004

2"

2"

Control Valve

H-10914    3"

H-10917     3"

Bushing

-

507783

Installation

Test Cap

36813 CI / 537478 steel

36813 CI / 537478 steel

Completion Plug Wrench

581264

581264

Drilling

MAOP*

125 psig

250 psig

Power Operator

H-604

H-604

Machine Adapter

36376

36376

Cutter Arbor

88470

88470

Shell Cutter

36337    2-1/4"

36337    2-1/4"

Pilot Drill

36336

36336

Cutting Grease

88366

88366

Honing Stone

682560

682560

Stopping

MAOP*

125 psig

125 psig

Stopping Machine

H-17135

H-17135

Machine Adapter

501717

501717

Solid Rubber Stopper

88478

88478

Replacement Rubber

36290

36290

Top Bypass Rubber Stopper

88471

88471

Replacement Rubber

36298

36298

Bottom Bypass Rubber Stopper

81495

81495

Replacement Rubber

36298

36298

Full Bypass Rubber Stopper

680513

680513

Replacement Rubber

509446

509446

Bottom-Out Stopper

681989

681989

Replacement Seal

529002

529002

Rubber Stopper Lubricant

580657

580657

Inserting

MAOP*

125 psig

125 psig

Inserting Machine

H-17135

H-17135

Inserting Machine Adapter

501717

501717

Inserting Tool

580940

580940

Extracting

MAOP*

125 psig

125 psig

Extracting Machine

H-17135

H-17135

Extracting Machine Adapter

501717

501717

Extracting Tool

580941

580941


D-5/DH-5 Machine

H-17125

2"

Control Valve

H-10918      3"

Bushing

-

Installation

Test Cap

36813 CI / 537478 steel

Completion Plug Wrench

581264

Drilling

MAOP*

250 psig

Power Operator

H-604

Machine Adapter

47394

Machine Adapter Bushing

507783

Boring Bar Extension

64297

Cutter Arbor

88470

Shell Cutter

36337

Pilot Drill

36336

Cutting Grease

88366

Honing Stone

682560

Stopping

MAOP*

250 psig

Stopping Machine

D-5/DH-5

Machine Adapter

89946

Stopper Holder

580932†

Solid Rubber Stopper

88478

Replacement Rubber

36290

Top Bypass Rubber Stopper

88471

Replacement Rubber

36298

Bottom Bypass Rubber Stopper

81495

Replacement Rubber

36298

Full Bypass Rubber Stopper

680513

Replacement Rubber

509446

Bottom-Out Stopper

681989

Replacement Seal

529002

Rubber Stopper Lubricant

580657

Inserting

MAOP*

250 psig

Inserting Machine

D-5/DH-5

Machine Adapter

47394

Boring Bar Adapter Extension

64297

Inserting Tool

36190

Extracting

MAOP*

250 psig

Extracting Machine

D-5/DH-5

Machine Adapter

47394

Extracting Tool Adapter

36198

Extracting Tool

83213


*Maximum Allowable Operating Pressure