H-17193

H-17193

Mueller® NO-BLO® H-17193 Low Pressure Extension Stopper Fitting Weld Type - 250 psig.

Catalog number: H-17193

Specifications:

  • Sizes – 2", 3" and 4"
  • Forged Steel Body ASTM A105
  • Cast Iron Completion Cap ASTM A126 CL.B
  • For use on schedule 40 steel pipe only
  • O-ring sealed cast iron Completion Plug (4" size has equalizi
  • 250 psig* (1724 kPa)
*This is the maximum pressure of the fitting installed in the line at 100F for Class Locations 1, 2, 3 and 4 as defined in D.O.T./CFR TITLE 49 PART 192. It may be necessary to reduce the line pressure during the drilling, stopping or plugging operations to the maximum working pressure of the machine or its attachments. Refer to charts on following pages.

Catalog PDF    

 

 

Demonstration Video

Pipe Dimension:

 

Size of Line Stopper Fitting

Outside Diameter of Shell Cutter Required

 

Outside Diameter of Pipe

Pipe Dimensions

Maximum Wall Thickness

Minimum Wall Thickness

Maximum Inside Diameter

2"

1-3/4"

2.375"

.173"

.135"

2.129"

3"

2-3/4"

3.500"

.243"

.189"

3.157"

4"

3-3/4"

4.500"

.267"

.207"

4.131"

Replacement Parts:

Fitting Size

Completion Cap

Completion Plug Only

Completion Plug O-ring Seal

Equalizing Valve Assembly

2"

36310

502905

79268

N/A

3"

36312

502955

503164

N/A

4"

502944

502943

60192

580912

How to select equipment:

  1. Find chart on following pages containing desired combination of fitting and installation machine (shown in bold type at top of each page and chart). Note: for a given fitting there may be more than one machine and chart.
  2. Under inlet size of fitting to be installed, select catalog number for type of control valve to be used. Options may include one or more of the following: H-10914 Bronze Gate Valve, H-17025 Control Chamber, H-10917 Slide Gate Valve, H-10918 Steel Ball Valve.
  3. Under selected control valve, column lists equipment necessary for each operation on chosen size of fitting. Note: MAOP (Maximum Allowed Operating Pressure) provided for each operation must not be exceeded. MAOP may be different for each operation.

D-5/DH-5 Machine:

H-17193

2"

2"

3"

3"

4"

Control Valve

H-10914       2"

H-10917      2"

H-10914       3"

H-10917       4"

H-10917       4"

Bushing

-

-

-

-

-

Installation

Test Cap

36811

36811

36813

36813

502929

Completion Plug Wrench

581264

581264

581264

581264

36404

Drilling (D-5 /DH-5 Only)

MAOP*

100

100

100

100

100

Power Operator

H-604

H-604

H-604

H-604

Drilling Machine Adapter

36525

36525

505831

505831

505832

ToolAdapter

502963

Cutter Holder

509741

509741

509742

509742

509743

Shell Cutter Complete

80515

1-3/4"

80515

1-3/4"

89351

2-3/4"

89351

2-3/4"

89352

3-3/4"

Chip Sweeper

580902

580902

580902

580902

580902

Chip Sweeper Bushing

51062

51062

502939

Chip Sweeper Magnet

682081

682081

682081

682801

682801

Cutting Grease

88366

88366

88366

88366

88366

Honing Stone

682560

682560

682560

682560

682560

Components of Shell Cutter

 

Arbor

580907

580907

580907

Shell Cutter

79279

79279

504223

504223

504224

Pilot Drill

37896

37896

502932

502932

502932

Stopping  (D-5 /DH-5 Only)

MAOP*

100

100

100

100

100

Machine Adapter

89349

89349

580918

580918

580906

Boring Bar Adapter

40438

40438

Rubber Stopper Holder

502900

502900

502937

502937

502937

Solid Rubber Stopper

580900

580900

580917

580917

580905

Replacement Rubber Only

502916

502916

502946

502917

580905

Rubber Stopper Lubricant

580657

580657

580657

580657

580657

Inserting

MAOP*

125

250

125

250

250

Machine Adapter

89349

59349

580918

580918

580906

Boring Bar Adapter

40438

40438

40438

40438

502937

Inserting Tool

83258

83258

580921

580921

580908

Extracting

MAOP*

125

250

125

250

250

Machine Adapter

89349

89349

580918

580918

580906

Extracting Tool

88384

88384

580919

580919

580913

*Maximum Allowable Operating Pressure