H-17503

Mueller® NO-BLO® H-17503 Service Tee Weld x Weld - 250 psig.

Catalog number: H-17503

Specifications:

  • Sizes* – 1-1/4" x 1-1/4", 3" x 3", 4" x 4"
  • Forged Steel Body ASTM A105/A234WPB
  • Cast Iron Completion Cap ASTM A126 CL.B
  • Cast Iron Completion Plug ASTM A126 CL.B
  • O-ring Sealed Completion Plug
  • Weld inlet
  • Outlet prepared for butt weld same size as outlet and socket weld one size smaller than outlet
  • 250** psig (1724 kPa)
*First size is size of inlet, second is size of outlet.
**This is the maximum pressure of the fitting installed in the line at 100F for Class Locations 1, 2, 3 and 4 as defined in D.O.T./CFR TITLE 49 PART 192. It may be necessary to reduce the line pressure during the drilling, stopping or plugging operations to the maximum working pressure of the machine or its attachments. Refer to charts on following pages.

Catalog PDF

 

     

Dimensions

 

 

Dimensions

Size* of Service Tee

1-1/4" x 1-1/4"

3" x 3"

4" x 4"

A

4-5/8"

9"

8-3/8"

B

2"

3-3/8"

4-1/8"

C

1-1/2"

3"

4"

D

1-3/8"

2-7/8"

3-7/8"

Replacement Parts 

 

Replacement Parts

Size* of Service Tee

1-1/4" x 1-1/4"

3" x 3"

4" x 4"

Completion Cap

38138

36312

502944

Completion Plug

503445

502955

580911

Completion Plug O-ring

40709

503164

60192

*First size is size of inlet, second is size of outlet.

How to select equipment

  1. Find chart on following pages containing desired combination of fitting and installation machine (shown in bold type at top of each page and chart). Note: for a given fitting there may be more than one machine and chart.
  2. Under inlet size of fitting to be installed, select catalog number for type of control valve to be used. Options may include one or more of the following: H-10914 Bronze Gate Valve, H-17025 Control Chamber, H-10917 Slide Gate Valve, H-10918 Steel Ball Valve.
  3. Under selected control valve, column lists equipment necessary for each operation on chosen size of fitting. Note: MAOP (Maximum Allowed Operating Pressure) provided for each operation must not be exceeded. MAOP may be different for each operation.

E-5/EH-5 Machine 

H-17503

1-1/4"

1-1/4"

Control Valve

H-10914    1-1/2"

H-10918    1-1/2"

Installation

Test Cap

79161

79161

Completion Plug Wrench

96536

96536

Drilling

MAOP*

125 psig

250 psig

Power Operator

H-604

H-604

Machine Adapter

33575

33575

Combined Drill and Holder

79186    1"

79186    1"

Cutting Grease

88366

88366

Honing Stone

682560

682560

Stopping

MAOP†

125 psig

250 psig

Machine Adapter

503435

503435

Rubber Shutoff Tool

88758

88758

Replacement Rubber

37459

37459

Rubber Stopper Holder

61969

61969

Rubber Stopper Lubricant

580657

580657

Inserting

MAOP*

125 psig

250 psig

Machine Adapter

33575

33575

EZ Release Inserting Tool

83257

83257

Extracting

MAOP*

125 psig

250 psig

Machine Adapter

33575

33575

Extracting Tool

83212

83212

E-5/EH-5 Machine 

H-17503

1-1/4"

1-1/4"

Control Valve

H-10914    1-1/2"

H-10918    1-1/2"

Installation

Test Cap

79161

79161

Completion Plug Wrench

96536

96536

Drilling

MAOP*

125 psig

250 psig

Power Operator

H-604

H-604

Machine Adapter

33575

33575

Combined Drill and Holder

79186    1"

79186    1"

Cutting Grease

88366

88366

Honing Stone

682560

682560

Stopping

MAOP†

125 psig

250 psig

Machine Adapter

503435

503435

Rubber Shutoff Tool

88758

88758

Replacement Rubber

37459

37459

Rubber Stopper Holder

61969

61969

Rubber Stopper Lubricant

580657

580657

Inserting

MAOP*

125 psig

250 psig

Machine Adapter

33575

33575

EZ Release Inserting Tool

83257

83257

Extracting

MAOP*

125 psig

250 psig

Machine Adapter

33575

33575

Extracting Tool

83212

83212

*MaximumAllowable Operating Pressure
**Stopping not an option using 3" and 4" Service Tees.
†In stopping section of chart, Maximum Allowable Operating Pressure (MAOP) applies to use of rubber shut off tool only. For steel shut off tool, variables in hole drilled in pipe may or may not allow similar MAOP.